Adapt Solutions Speedy-Lift
The Speedy-Lift is a fast moving, compact wheelchair lift, usually only taking up the space of one seat in the rear of the vehicle. Once an empty wheelchair is backed up to the lift, the user pushes the IN button on the remote, and the wheelchair is picked up and secured in the vehicle.
Simply back an empty wheelchair up to the SPEEDY-LIFT and push the IN button. The SPEEDY-LIFT picks up the chair and secures it in place.
The compact design takes up very little space. In most cases, only one seat is removed from the inside of the vehicle. Keep the use of up to 6 seats in a minivan application.
The name says it all: the SPEEDY-LIFT is a fast moving, effective wheelchair lift. A full cycle, all the way out of the vehicle and back in takes less than 30 seconds. You are in and on your way in no time!
Effortless stowing! Once you have transferred out of your wheelchair, just back it up to the side of your van, push the button and the SPEEDY-LIFT does the rest. To make things easier, the SPEEDY-LIFT comes complete with an automatic locking mechanism. This way you wont even have to worry about fastening your wheelchair in place, as it is already done for you.
Not interested in drilling and cutting your vehicle? We get that! The SPEEDY-LIFT installs into your vehicles original seat anchorage brackets, without cutting or drilling your vehicle. Return the vehicle to its original condition without affecting resale value simply by removing the SPEEDY-LIFT.
The SPEEDY-LIFT has a 95 lbs weight capacity and was designed exclusively for minivans and the Mazda 5®. The vehicle battery is the power source and power is not drained when the SPEEDY-LIFT is not in use. Every unit is equipped with a manual backup system.
Three optional trim colors are available to match your vehicle's interior: black, tan or grey. The SPEEDY-LIFT was designed to work as a pair with any of the following products to make vehicle access and wheelchair storage easier and faster: the XL-BASE, XL-SEAT and XL-BOARD
Although the SPEEDY-LIFT was originally designed to be used with rigid frame wheelchairs, an adapter kit for manual folding wheelchairs was developed. This adaptor kit is built out of aluminum for minimal weight and is added to your wheelchair using existing bolts. If required, the wheelchair can still be folded with minimal effort.